A/C System Use
With the Mitsubishi Split AC System guests can set their own temperature preference as desired. The system is very quiet and easy to use. The controller is on the bedroom entrance door panel. Please replace it in it’s cradle to keep handy. To operate, please download or view the Mitsubishi AC Controller Instruction Manual. Or follow the photo session below:
Control Unit Operation
Front Control Unit – The OFF/ON Button is clearly indicated on the front of the Controller. Turning ON will indicate the various modes the unit will control. Too access additional modes, slide the Front Cover down by holding the control unit in one hand and gently sliding the front cover down to expose the mode control buttons.
Circulating Air
Circulating Air Mode – Push the “MODE” button until the circulating icon is displayed. This mode provides fresh and circulating air.
Cool Mode
Cool Mode – Push the MODE button until the Snowflake icon appears. This indicates the Cooling Mode. Adjust the temperature Up/Down with the Up/Down arrows as desired. Indicator is set to Farhrenhite.
Dehumidify Mode
Dehumidify Mode – Push MODE button until the Water Drop icon appears. This is the Dehumidify Mode and helps to remove excess water from the air in the room.
Heat Mode
Heat Mode – Push the MODE button until the Sun Shine icon appears. This indicates the Heating Mode. Adjust the temperature Up/Down with the Up/Down arrows as desired. Indicator is set to Farhrenhite.
